HP XP P9500 Manual page 132

Table 48 Error codes (part code 5205) (continued)
Part Error
Code Number
5205 1236
5205 1237
5205 1238
5205 1239
5205 1240
5205 1241
5205 1242
5205 1243
5205 1246
5205 1247
5205 1606
5205 1607
5205 1608
5205 1609
5205 1610
5205 161 1
5205 1612
5205 2003
5205 2004
132 Message (part code group 5nnn)
Error Message
Synchronous Z, or External Storage
Access Manager.
The RAID level of the target volume is not
supported.
The specified volume(s) are already used
by Business Copy Z or Business Copy.
The specified volume(s) are already used
by Business Copy Z or Business Copy.
The volume(s) is already being used by
Data Migration.
The specified volume(s) are already used
by Business Copy Z or Business Copy.
The volume specified as the migration
source has the Cache Residency setting.
The volume specified as the migration
target has the Cache Residency setting.
The specified volume is not a source
volume.
The number of plans that could be
executed at once exceeds the maximum.
The volume is already a source volume.
The program product of Auto LUN is not
installed.
Volume Security for Mainframe settings
exist on the specified volume.
Volume Security for Mainframe settings
exist on the specified volume.
Volume Retention settings exist on the
specified volume.
Volume Retention settings exist on the
specified volume.
The specified volume has Read
Only/Protect/S-VOL Disable setting of
Data Retention.
The specified volume has Read
Only/Protect/S-VOL Disable setting of
Data Retention.
An internal process is being executed,
or maintenance is in progress.
An error occurred during SVP
processing.
Recommended Action
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Specify another volume.
Specify another volume.
Release the Data Migration.
Check the status of the selected volume.
Specify another volume.
Specify another volume.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Install the Auto LUN program product.
Release the Volume Security for
Mainframe settings.
Release the Volume Security for
Mainframe settings.
Release the Volume Retention settings.
Release the Volume Retention settings.
Release the Read Only/Protect/S-VOL
Disable setting of Data Retention.
Release the Read Only/Protect/S-VOL
Disable setting of Data Retention.
Confirm that maintenance operation is
not in progress, and retry after a while.
If this problem persists, please contact
HP Technical Support.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
E