HP XP P9500 Manual page 194

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 56 Error codes (part code 6505) (continued)
Part
Error
Code
Number
6505
8890
6505
8891
6505
8893
6505
8894
6505
8895
6505
8896
6505
8897
6505
8898
6505
8899
6505
8900
6505
8901
6505
8902
6505
8903
6505
8915
6505
8922
6505
8924
6505
8929
6505
8930
6505
8931
6505
8932
194 Message (part code group 6nnn)
Error Message
The specified port is being initialized.
Logical paths exist on the port.
An internal error occurred.
Jobs exist on the port.
Jobs exist on the port on the remote
subsystem.
A parameter error has occurred.
LUs exist on the port.
Pending data exists on the port.
An internal error occurred.
An error occurred during the port
change.
An error occurred during the port
change.
An error occurred during the port
change.
Unknown Error Code.
Remote Web Console attempted to
change the port type. However, this
attempt was rejected because the same
operation was in progress from a host.
The primary storage system does not
support remote copy function via the
serial interface.
Logical paths are defined to the port on
the remote subsystem.
Invalid port type.
Logical paths are defined to the port on
the remote subsystem.
Logical paths are defined to the port on
the remote subsystem.
Failed to create the logical path, because
the configuration definition of the
specified LDKC number did not exist in
the primary storage system.
Recommended Action
Wait until the initialization of the port
ends, and retry the operation.
Delete the logical paths on the port and
retry the operation.
Check the SSB log, then contact HP
Technical Support.
Stop the jobs from the host and retry the
operation.
Stop the jobs from the host and retry the
operation.
Refresh the window, and retry. If nothing
changes, please contact HP Technical
Support.
Delete the LUs defined on the port, and
retry the operation.
Retry the operation.
Check the SSB log, then contact HP
Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Check the status of the port, and retry
the operation.
Check whether the primary storage
system supports remote copy via serial
interface. Install the microcode that
supports remote copy via serial interface,
or execute remote copy via fibre
interface.
Delete the logical paths on the specified
port, and retry the operation.
Check the port type of the specified port,
and retry the operation.
Delete the logical paths on the specified
port, and retry the operation.
Delete the logical paths on the specified
port, and retry the operation.
Check whether the specified LDKC
number is defined in the configuration
of the primary storage system.
Severity
Level
W
W
E
W
W
W
W
W
E
E
E
E
E
W
W
w
W
W
W
W

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents