HP XP P9500 Manual page 141

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 48 Error codes (part code 5205) (continued)
Part
Error
Error Message
Code
Number
5205
65715
Migration cannot be executed because
it is a migration between a Thin
Provisioning volume and a normal
volume that contains a component of a
LUSE volume
5205
65716
The specified volume cannot be set as a
reserved volume.
5205
65737
The specified volume cannot be used,
because it is a volume of Thin
Provisioning whose capacity is being
added.
5205
65738
The volume specified as a migration
target cannot be used, because it is a
volume of Thin Provisioning in capacity
expanding.
5205
65739
The specified volume cannot be used,
because it is a volume of Thin
Provisioning whose capacity is being
added.
5205
65740
The configuration changing processes
are conflicting at DKC.
5205
65748
The volume specified as a migration
source cannot be used, because it is a
volume of Thin Provisioning in zero data
discarding.
5205
65749
The volume specified as a migration
target cannot be used, because it is a
volume of Thin Provisioning in zero data
discarding.
5205
65750
The specified volume cannot be used,
because it is a volume of Thin
Provisioning whose zero data is being
discarded.
5205
65784
The volume specified as a migration
source cannot be used, because it is a
quorum disk.
5205
65785
The volume specified as a migration
target cannot be used, because it is a
quorum disk.
5205
65786
The volume specified as the reserved
volume cannot be used, because it is a
quorum disk.
5205
75008
The volume specified as a reserved
volume has an LU path setting.
5205
75010
The number of target volumes that can
be executed at once exceeds the
maximum.
Recommended Action
Check the setting of the specified volume.
Check the setting of the specified volume.
Check the specified volume capacity
after the completion of the capacity
expanding operation.
Confirm the capacity of the volume
specified as a migration target after the
capacity expanding operation is
completed.
Check the specified volume capacity
after the completion of the capacity
expanding operation.
Check if the configuration changing
process by RAID Manager, Auto LUN,
or Quick Restore is not in the operation,
then retry the operation.
Retry the operation after the zero data
discarding operation is completed.
Retry the operation after the zero data
discarding operation is completed.
Retry the operation after the zero data
discarding operation is completed.
Check the content of the operation.
Check the content of the operation.
Check the content of the operation.
Specify another volume, then retry the
operation.
Correct the number of reserved volumes
to set or release to 64 or less, and the
number of manual migration instructions
to 8 or less, then retry the operation.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 5205
141

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents