HP XP P9500 Manual Page 181

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 55 Error codes (part code 6010) (continued)
Part
Error
Error Message
Code
Number
6010
8101
The system cannot apply the new
configuration. Do you want to refresh?
6010
8928
An error occurred when copying started.
Do you want to recover from the error
condition?
6010
9006
Exchange the channel cable connections
after confirmation of the port type.
6010
9007
Please confirm that the R-VOLs to specify
are varied off-line.
6010
9008
SIMs of Remote Copy are cleared.
6010
9009
The export is complete.
6010
9021
The Port Setting process has not
completed. Do you want to continue for
other ports?
6010
9022
WARNING: Initial copy mode 'None'
is selected for some volume pairs. Are
you sure that the M-VOL and the R-VOL
of these pairs are already synchronized?
6010
9024
Are you sure you want to exchange the
specified ports? Please confirm the
associated channel paths are off-line.
6010
9025
Are you sure you want to switch the
ports? If the remote copy paths exist on
the ports, delete them beforehand.
6010
9026
Are you sure you want to switch the
ports? If any remote copy paths exist on
the ports, delete them beforehand. Also,
to avoid the switching operation from
being reported as a failure, confirm first
that a message prompting you to change
the channel cable connections is
displayed, and then perform the
necessary changes.
6010
9070
Are you sure you want to delete the
specified RCUs?
6010
9071
Are you sure you want to delete the
paths of a specified RCU?
6010
9072
Are you sure you want to delete the
specified volume pairs?
6010
9073
Are you sure you want to suspend the
specified volume pairs?
6010
9075
Are you sure you want to delete the
SSIDs of a specified RCU?
6010
9100
Do you want to exit?
6010
9101
Do you want to cancel?
Recommended Action
Click [Refresh], and retry.
Click [Yes] to recover from the error
condition. If not, click [No].
If the recovery fails despite retrying,
suspend the corresponding pair
temporarily, and execute Resume Pair
(Pairresync) operation.
Follow the instructions in the message.
Confirm that the R-VOLs to specify are
varied off-line.
Click [OK].
Click [OK].
Click [Yes] to continue processing. After
processing is complete, reset the port
that is not in operation.
Check the contents of the main and
remote volumes. If the contents match,
click [OK]. If not, click [Cancel].
Follow the instructions in the message.
To continue the operation, click [OK].
Otherwise, click [Cancel].
To continue the operation, click [OK].
Otherwise, click [Cancel].
To delete the specified RCU, click [OK].
Otherwise, click [Cancel].
To delete the specified path, click [OK].
Otherwise, click [Cancel].
To delete the specified pair, click [OK].
Otherwise, click [Cancel].
To suspend the specified pair, click [OK].
Otherwise, click [Cancel].
To delete the specified SSID, click [OK].
Otherwise, click [Cancel].
To close the window, click [OK].
Otherwise, click [Cancel].
To cancel, click [OK].
Severity
Level
W
W
i
i
i
i
i
i
i
i
i
W
W
W
i
W
i
i
Part code 6010
181

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: