Table 50 Error codes (part code 5305) (continued)
Part
Error
Error Message
Code
Number
5305
56526
The resources of other SLPR(s) cannot be
accessed.
5305
57101
An error occurred during SVP
processing.
5305
57102
An error occurred during SVP
processing.
5305
58572
An error occurred while connecting to
the subsystem.
5305
58573
This function is not supported.
5305
58574
An error occurred while connecting to
the subsystem.
5305
58575
An error occurred while connecting to
the subsystem.
5305
58576
A communication time-out error occurred
in the disk subsystem.
Recommended Action
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
The error may be caused by a temporary
communication failure. Reboot the SVP
or click [Refresh All] on the File menu of
Remote Web Console and refresh the
configuration information to recover from
the error.
If this problem persists, please contact
HP Technical Support.
The error may be caused by a temporary
communication failure. Reboot the SVP
or click [Refresh All] on the File menu of
Remote Web Console and refresh the
configuration information to recover from
the error.
If this problem persists, please contact
HP Technical Support.
The error may be caused by a temporary
communication failure. Reboot the SVP
or click [Refresh All] on the File menu of
Remote Web Console and refresh the
configuration information to recover from
the error.
If this problem persists, please contact
HP Technical Support.
Check if the DKCMAIN microcode and
SVP microcode versions are mismatched.
The error may be caused by a temporary
communication failure. Reboot the SVP
or click [Refresh All] on the File menu of
Remote Web Console and refresh the
configuration information to recover from
the error.
If this problem persists, please contact
HP Technical Support.
The error may be caused by a temporary
communication failure. Reboot the SVP
or click [Refresh All] on the File menu of
Remote Web Console and refresh the
configuration information to recover from
the error.
If this problem persists, please contact
HP Technical Support.
The error may be caused by a temporary
communication failure. Reboot the SVP
or click [Refresh All] on the File menu of
Remote Web Console and refresh the
configuration information to recover from
the error.
If this problem persists, please contact
HP Technical Support.
Severity
Level
E
E
E
E
E
E
E
E
Part code 5305
147