HP XP P9500 Manual page 172

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 53 Error codes (part code 6005) (continued)
Part
Error
Code
Number
6005
58452
6005
58454
6005
58460
6005
58494
6005
58495
6005
58496
6005
58497
6005
58498
6005
58499
6005
58509
172 Message (part code group 6nnn)
Error Message
The operation failed because the
licensed capacity of Open System
Array Management on the RCU side
was insufficient or Open System Array
Management was not installed on the
RCU.
The operation failed because the
licensed capacity of Open System
Array Management on the MCU side
was insufficient or Open System Array
Management was not installed on the
MCU.
The specified M-VOL is already used
as a primary data volume for
Continuous Access Journal or
Continuous Access Journal Z. If you
want to use the M-VOL in conjunction
with one of these program products,
please recreate the Continuous Access
Journal pair or the Continuous Access
Journal Z pair using a mirror ID other
than 0, and retry the operation.
A pair cannot be created because the
specified M-VOL is being used by
Snapshot.
A pair cannot be created because the
specified R-VOL is being used by
Snapshot.
A pair cannot be created because the
specified M-VOL is a virtual volume.
A pair cannot be created because the
specified R-VOL is a virtual volume.
A pair cannot be created because the
specified M-VOL is being used as a
pool volume.
A pair cannot be created because the
specified R-VOL is being used as a pool
volume.
A communication time-out error
occurred between MCU and RCU.
Please wait for a while, and then retry
the operation.
Recommended Action
Check the licensed capacity
of Open System Array
Management on the RCU
side, or confirm whether
Open System Array
Management is installed on
the RCU. To execute this
operation, purchase a
license key that allows you
to use a larger capacity or
install Open System Array
Management on the RCU.
Check the licensed capacity
of Open System Array
Management on the MCU
side, or confirm whether
Open System Array
Management is installed on
the MCU. To execute this
operation, purchase a
license key that allows you
to use a larger capacity or
install Open System Array
Management on the MCU.
Use another volume, or
recreate the Continuous
Access Journal pair or the
Continuous Access Journal
Z pair using a mirror ID
other than 0. Then retry the
operation.
Specify another volume.
Specify another volume.
Specify another volume.
Specify another volume.
Specify another volume.
Specify another volume.
Wait a while, then retry the
operation.
Severity Level
W
W
W
W
W
W
W
W
W
W

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents