HP XP P9500 Manual page 338

Table 106 Error codes (part code 20705) (continued)
Part Code Error Number
20705 6022
20705 6533
20705 6537
20705 8000
20705 8102
20705 8966
20705 65740
20705 75101
20705 76101
20705 76102
20705 76103
20705 76104
20705 76105
20705 76106
20705 76107
20705 76109
20705 761 10
20705 761 1 1
338 Message (part code group 20nnn)
Error Message
An error occurred during SVP
processing.
An error occurred during SVP
processing.
The setting process has not been
executed because there is no error in
this setting, but an error in the others
settings.
An error occurred during SVP
processing.
This function is not supported.
An error occurred on the DKC side.
The configuration changing processes
are conflicting at DKC.
An error occurred during SVP
processing.
The number of requests exceeds the
maximum number that can be
processed.
An incorrect ResourceGroupID was
specified.
The specified ResourceGroupID has
already been specified.
The number of characters for resource
group name should be from 1 to 32.
Invalid characters are used in the
specified resource group name.
\/:,;*?"<>| and any spaces on the
beginning and ending of the name
cannot be used.
The specified resource group name is
already registered.
The specified number of resources has
reached the upper limit.
An error occurred during SVP
processing.
The specified resource has already
been specified.
An error occurred during SVP
processing.
Recommended Action
If this problem persists, please
contact HP Technical Support.
If this problem persists, please
contact HP Technical Support.
Check the error factor in the others
settings.
If this problem persists, please
contact HP Technical Support.
Check whether the DKCMAIN
microcode version and the SVP
microcode version are
mismatched.
If this problem persists, please
contact HP Technical Support.
Check if the configuration
changing process by RAID
Manager, Auto LUN, or Quick
Restore is not in the operation,
then retry the operation.
If this problem persists, please
contact HP Technical Support.
Reduce the number of requests,
and then retry the operation.
Specify the registered
ResourceGroupID, and then retry
the operation.
Exclude the duplicated setting, and
then retry the operation.
Correct the resource group name
so that it consists of 1 to 32
characters.
Delete the characters that cannot
be used.
Specify another resource group
name.
Reduce the number of resources to
be specified, and then retry the
operation.
If this problem persists, please
contact HP Technical Support.
Exclude the duplicated setting, and
then retry the operation.
If this problem persists, please
contact HP Technical Support.
Severity Level
E
E
W
E
E
E
E
E
E
W
W
W
W
W
W
E
W
E