Ultrium Bar Code Labels - HP StorageWorks ESL E-Series Installation Manual

• Data residing on the tape
• Age of the backup
• Errors encountered while using the tape (to determine if the tape is faulty)

Ultrium bar code labels

Ultrium cartridges have a recessed area located on the face of the cartridge next to the write-protect
switch. Use this area for attaching the adhesive-backed bar code label (see
apply labels onto the cartridge except in this designated area.
CAUTION: The bar code label should be applied as shown in
portion facing the hub side of the cartridge. Never apply multiple labels onto a cartridge, because
extra labels can cause the cartridge to jam inside a tape drive.
Figure 48 Attaching an Ultrium bar code label
58 Loading tape cartridges
Figure 48). Do not
Figure 48 with the alphanumeric