HP XP P9500 Manual page 137

Table 48 Error codes (part code 5205) (continued)
Part Error Error Message
Code Number
5205 8971 An error occurred during SVP
processing.
5205 55059 The specified volumes cannot be used
for migration, because the specified
source volume is a Continuous Access
Synchronous volume, a Continuous
Access Synchronous Z volume, or an
External Storage Access Manager
volume, and the specified target volume
is an external volume.
5205 55060 The specified Auto LUN plan cannot be
executed because a volume on which
VMA of Data Retention is set is paired
with a volume on which VMA is not set.
5205 55201 If the migration source volume is a
normal volume, a CVS volume of the
same capacity as the migration source
volume cannot be specified as the
migration target volume. If the migration
source volume is a CVS volume, a
normal volume of the same capacity as
the migration source volume cannot be
specified as the migration target volume.
5205 55207 The auto migration plans cannot be
created because "None" is specified in
"Sampling Term."
5205 55223 The owner ID of the disk subsystem used
by the user does not match the owner ID
of the specified target volume.
5205 55224 The owner ID of the disk subsystem used
by the user does not match the owner ID
of the specified reserve volume.
5205 55225 The specified plan is the one created by
other than Remote Web Console.
5205 55226 The specified plan is the one created by
other than Remote Web Console.
5205 55227 The specified volume is already reserved
with a different owner ID by Auto LUN.
5205 55257 The volume(s) are already being used as
a data volume by Continuous Access
Journal or Continuous Access Journal Z.
5205 55258 The volume(s) are already being used as
a data volume by Continuous Access
Journal or Continuous Access Journal Z.
5205 55259 The volume(s) are already being used as
a data volume by Continuous Access
Journal or Continuous Access Journal Z.
5205 55431 The specified volumes are already being
used by Compatible FlashCopy or
Compatible FlashCopy SE.
Recommended Action
If this problem persists, please contact
HP Technical Support.
Specify the other volumes.
Confirm the settings of the specified
volumes.
Check the setting of the migration source
volume and the migration target volume.
Specify the parameters other than
"None" in "Sampling Term."
Select a volume that has the same owner
ID.
Select a volume that has the same owner
ID.
The specified plan cannot be released
with Remote Web Console.
The specified migration plan cannot be
stopped with Remote Web Console.
Select a volume that has the same owner
ID.
Confirm the setting of the specified
volume.
Confirm the setting of the specified
volume.
Confirm the setting of the specified
volume.
Confirm the setting of the specified
volume.
Severity
Level
E
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 5205 137