HP XP P9500 Manual page 86

Table 33 Error codes (part code 3005) (continued)
Part Error
Code Number
3005 2200
3005 2201
3005 2202
3005 2203
3005 2204
3005 2205
3005 251 1
3005 2512
3005 2515
3005 2516
3005 2517
86 Message (part code group 3nnn)
Error Message
Replacement of an OEM drive
microprogram is in progress
LDEV Shredding is in progress
Therefore the specified operation
cannot be executed.
The Concurrent Copy or the Compatible
XRC operation is in progress in the
target volumes.
Processing cannot be performed
because of Data Retention settings.
The specified volume cannot be
processed due to the effect of the
access attribute assigned by Volume
Retention.
Processing cannot be performed
because of Volume Security for
Mainframe settings.
Devices to be maintained include
journal volumes.
Devices to be maintained include
journal volumes.
The restore operation has been failed,
because the specified LDEV was not
shredded or formatted.
The restore operation has been failed,
because the system cannot access the
specified LDEV.
One of the following is defined: a
Remote Copy pair, a Continuous
Access Journal pair, or a Continuous
Access Journal Z pair. Alternatively,
command devices defined by Business
Continuity Manager are included.
One of the following is defined: a
Remote Copy pair, a Continuous
Access Journal pair, or a Continuous
Access Journal Z pair.
The target volume is defined as a pair
of Business Copy, Business Copy Z, or
Snapshot. Or, the volume is used in
Compatible FlashCopy Compatible
FlashCopy SE, or Compatible XRC.
Recommended Action
If the Concurrent Copy or the Compatible
XRC operation is in progress in the target
volumes, cancel the Concurrent Copy
job or delete a Compatible XRC pair via
the host. If the Concurrent Copy or the
Compatible XRC operation is not in
progress in the target volumes, issue the
LISTSESS and LISTDVCS commands,
check the SESSION ID No., and
terminate SESSION by means of the
TERMSESS command.
Check the settings, then retry the
operation.
Check the settings, then retry the
operation.
Check the settings, then retry the
operation.
Delete or suspend all pairs belonging to
journal volumes to be maintained.
Delete all pairs belonging to journal
volumes to be maintained.
Shred or format the specified LDEV. If
the specified LDEV is Thin Provisioning
volume (V-VOL), recover the pool first.
Please contact HP Technical Support.
Release the pair definition or delete
command devices defined by Business
Continuity Manager, and then retry the
operation.
Delete the pair definition or suspend the
pair, and then retry the operation.
Split the pair, and then retry the
operation. If the Quick Split mode is on,
suspend the pair, and then split the pair.
Change the setting to not use the volumes
of the Compatible FlashCopy Compatible
FlashCopy SE, or Compatible XRC as a
target volume, and then retry the
operation.
Severity
Level
W
W
W
W
W
W
W
E
W
W
W