HP XP P9500 Manual page 92

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 33 Error codes (part code 3005) (continued)
Part
Error
Code
Number
3005
65767
3005
65790
3005
68722
3005
68723
3005
68724
3005
68725
3005
68726
3005
68727
3005
68728
3005
68729
3005
68736
3005
68748
3005
68751
3005
68761
3005
68785
3005
68786
3005
68797
92
Message (part code group 3nnn)
Error Message
The specified volume contains a quorum
disk.
The specified volume includes a remote
command device being used by a
mirror of the journal group.
The specified volume is not a Thin
Provisioning volume.
An internal logic contradiction occurred
on the DKC side.
Shared memory is not installed.
The shared memory for the V-VOL
management area is insufficient.
The capacity of Thin Provisioning
volume (V-VOL) is insufficient.
Shared memory is being initialized.
The pool is in an abnormal state.
LDEV format is being executed in the
specified volume.
An error occurred during SVP
processing.
The number of Thin Provisioning
volumes that can be associated with a
single pool has exceeded the
maximum.
The disk storage system is executing the
processing to release the association,
inside.
An error occurred on the DKC side.
A parity group that is not mounted is
included in the specified parity groups.
A parity group that is not blocked is
included in the specified parity groups.
Failed to restore the pool. Pool cannot
be restored when it is in following
status:
It is taking time for processing
because some blocked parts exist in
the storage system.
The pool volume is blocked.
Recommended Action
or Quick Restore is not in the operation,
then retry the operation.
Check the specified volume.
Check the specified volume.
Check the setting of the specified volume.
Please contact HP Technical Support.
Install the shared memory.
Delete the unnecessary Thin Provisioning
Pools (THP Pool) and Thin Provisioning
volume (V-VOL), then retry the operation.
If this problem persists, please contact
HP Technical Support.
Check volume capacity for the V-VOL.
Wait a while, then retry the operation.
Recover the pool, then retry the
operation.
Retry the operation after the formatting
operation has completed.
If this problem persists, please contact
HP Technical Support.
Check the current configuration of
association.
Wait for a while, then retry the
operation.
If this problem persists, please contact
HP Technical Support.
Check the specified parity groups.
Check the status of the specified parity
groups.
When the pool cannot be restored, wait
for a while, click [Refresh] or [Refresh
All] on the [File] menu of the Remote
Web Console window, then check the
pool status in the pool window.
If this problem persists, refer to the
troubleshooting section in the HP P9000
Provisioning for Open Systems User
Guide.
Severity
Level
W
W
W
E
W
W
W
W
W
W
E
W
W
E
W
W
W

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents