Part Code 8107; Part Code 81 10 - HP XP P9500 Manual

Part code 8107

Table 69 Error codes (part code 8107)
Part Error
Code Number
8107 5641
8107 5642
8107 5643

Part code 81 10

Table 70 Error codes (part code 81 10)
Part Error
Code Number
81 10 5001
81 10 5002
81 10 5003
81 10 5004
81 10 5627
81 10 5628
81 10 5629
81 10 5630
81 10 5631
81 10 5633
81 10 5634
81 10 5772
81 10 5773
81 10 5774
Error Message
The number of lines exceeds the
maximum number of lines of a
spreadsheet.
The number of characters exceeds the
maximum number of characters of a
spreadsheet.
A time-out error occurred. Please wait
for the SVP to reboot, and then retry the
operation.
Error Message
Starting file transfer client.
Inaccurate data was acquired.
Failed to get the data.
The first tag is invalid.
The file name should be from 1 to 32
characters.
Following characters cannot be used for
the file name: " \ / , : ; * ? < > | and
space.
The file specified by [File Name on
Client] does not exist.
The file specified by [File Name on
Client] cannot be read.
The object specified by [File Name on
Client] is not a file.
The file path should be from 1 to 255
characters.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
Modify mode released due to inactivity.
Restart Modify mode (press the
mode-switching button again) to
continue.
The file path of the specified file by [File
Name on Client] is incorrect.
The file specified by [File Name on
Client] is write-protected.
Recommended Action
Check the setting.
Check the setting.
If the same error occurs despite retrying,
please contact HP Technical Support.
Recommended Action
Wait about three minutes, then retry.
The acquired data is inaccurate. If this
problem persists, please contact HP
Technical Support.
Retry the operation.
Correct the first tag.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Modify mode released due to inactivity.
Restart Modify mode (press the
mode-switching button again) to
continue.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
Severity
Level
W
W
W
Severity
Level
W
W
W
W
W
W
W
W
W
W
E
W
W
W
Part code 8107 293