HP XP P9500 Manual page 161

Table 53 Error codes (part code 6005) (continued)
Part Error Error Message
Code Number
6005 8817 Preset Suspension is effective in the CT
Group.
6005 8818 Preset Suspension is effective in the CT
Group.
6005 8819 A volume cannot be used as an R-VOL
when:
it is in an intervention-required
condition.
it is in a protection condition.
it is in unusable condition.
it is a secondary volume of Business
Copy or a target volume of Business
Copy Z.
it is a reserved volume of Business
Copy or Business Copy Z.
it is a volume reserved by Auto LUN.
it is used by Continuous Access
Journal Z.
6005 8820 The specified R-VOL is not a permissible
condition of Remote Copy.
6005 8821 The specified R-VOL is not recognizable
from the connection port.
6005 8822 An I/O Error occurred on the R-VOL,
or the R-VOL is in an unusable
condition.
6005 8826 An internal error occurred.
Recommended Action
same group being changed
to simplex/suspend status in
RCU. After a few minutes,
refresh and check the
Continuous Access
Synchronous window. If
specified volume is in a
permissible status, retry the
operation.
Cancel the preset suspension
in the CT group, then retry
the operation.
Cancel the preset suspension
in the CT group, then retry
the operation.
Select another volume.
The Continuous Access
Synchronous operation
failed, because R-VOL has
one of the following
conditions:
The volume is blocked.
The volume is under
maintenance.
The volume is copying
data (correction copy or
drive copy).
The volume is in the
correction access
condition.
Verify the configuration of
the specified R-VOL.
Check whether the volume
is in a usable condition. If
the volume is usable, please
contact HP Technical
Support.
Please contact HP Technical
Support.
Severity Level
i
i
W
W
W
W
E
Part code 6005 161