Part Code 1305 - HP XP P9500 Manual

Table 28 Error codes (part code 01022) (continued)
Part Error
Code Number
01022 108012
01022 108013
01022 108014
01022 108015
01022 108016
01022 108017
01022 108018
01022 108025
01022 108026
01022 108027
01022 108028
01022 109201
01022 109202
01022 109203

Part code 1305

Table 29 Error codes (part code 1305)
Part Error
Code Number
1305 5013
1305 5099
1305 66566
1305 66567
1305 66568
Error Message
The specified LDEV is a pool volume.
The specified LDEV is a V-VOL.
The specified LDEV is a remote command
device.
The selected LDEV has been set as a
quorum disk volume.
The specified LDEV is a reserved volume
of Data Retention.
The specified LDEV is neither OPEN
Volume nor Mainframe intermediate
volume.
The specified LDEV is not a top volume
of the LUSE volume.
The specified port is neither Target nor
RCU Target.
The host mode of the specified host
group is "4C." Only a External Storage
volume can be specified.
An error occurred.
An error occurred.
When you switched the host mode
option 33 from Enabled to Disabled,
access to an LU where a UUID is
allocated is disabled.
When you switched the host mode
option 33 from Disabled to Enabled,
access to LU where UUID is not allocated
is disabled.
Consecutive LUN ID could not be
allocated from the specified number.
Error Message
An error occurred during SVP
processing.
An error occurred during SVP
processing.
Insufficient permission to operate this.
Specified file name or directory name is
too long.
Multiple operation tags are defined.
Recommended Action
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
If the problem persists despite retrying,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
Check that no UUID is allocated to all
LUs set in the host group, then reboot
OpenVMS.
Check that UUID is allocated to all LUs
set in the host group, then reboot
OpenVMS.
If you want to allocate consecutive
numbers, retry the operation by
changing the Initial LUN ID.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Please contact HP Technical Support.
Check the character string of the
specified file name or directory name.
Check the contents of the spreadsheet.
Severity
Level
W
W
W
W
W
W
W
W
W
E
E
W
W
i
Severity
Level
E
E
E
W
W
Part code 1305 77