HP XP P9500 Manual page 82

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 31 Error codes (part code 2005) (continued)
Part
Error
Code
Number
2005
1925
2005
2005
2005
2009
2005
2013
2005
2015
2005
2032
2005
2082
2005
2083
2005
2084
2005
2098
2005
2099
2005
2502
2005
2503
2005
3002
2005
3003
2005
3006
2005
5013
82
Message (part code group 2nnn)
Error Message
The combination order of LUSE volume
is incorrect.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred while connecting to
the storage system.
An error occurred while connecting to
the storage system.
Processing is disabled because the host
is mounted or the device is reserved.
The subsystem status is invalid.
The subsystem status is invalid.
The operation cannot be performed,
because the SVP microcode version does
not match the DKCMAIN (subsystem)
microcode version.
The operation cannot be performed,
because an inoperative Processor exists.
The specified volume cannot be
combined as a LUSE volume because it
is not Read/Write attribute (S-VOL
enabled).
The LUSE volume cannot be released
because the attribute of the specified
volume is not Read/Write (S-VOL
enabled).
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
Recommended Action
Check the settings.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
Unmount the host and cancel reservation
of the device. If the host is an AIX host,
unmount the host, and execute the
varyoffvg command.
Check the DKC status and the current
status of the configuration setting. If
necessary, re-execute the setting
operation.
Check the DKC status and the current
status of the configuration setting. If
necessary, re-execute the setting
operation.
If the problem persists, please contact
HP Technical Support.
Wait a while, then retry the operation.
If the same problem persists, please
contact HP Technical Support.
Correct settings, then retry.
Correct settings, then retry.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Severity
Level
W
E
E
W
W
W
W
W
W
E
W
W
W
E
E
E
E

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents