HP XP P9500 Manual Page 184

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 55 Error codes (part code 6010) (continued)
Part
Error
Code
Number
6010
931 1
6010
9316
6010
9317
6010
9318
6010
9324
6010
9325
6010
9327
6010
9332
6010
9337
6010
9360
6010
55035
6010
55202
6010
55203
6010
55204
6010
56537
6010
56540
6010
59001
184 Message (part code group 6nnn)
Error Message
All SSIDs which you set have already
been registered. This operation will
terminate because there is no SSID which
can be added.
Through this operation, M-VOL status will
be changed to Simplex mode even if the
M-VOL is online to the host.
The destination volume of the specified
volume pair may contain some
inconsistency because volume copy is
not completed yet. Full volume
initialization is required before re-using
it.
As a result of this operation, you will not
be able to re-start ERASE R-VOL
operation.
The specified operation is prohibited
while the script is running.
The script is terminated forcibly.
The monitoring time is over, but the
history file is not fully updated yet.
This operation is not applied yet.
The requested operation has started.
The specified value exceeds the range.
Alternatively, the relationship between
the specified values is not appropriate.
If you plan to create a pair with the
specified LUSE volumes, a DKC path is
required.
The subsystem specified by Controller ID
is not available for the particular CU
selected from the tree.
There are no initiator ports that can be
used by the subsystem specified by
Controller ID.
The M-VOL or R-VOL is not supported by
the specified RCU.
There are no consistency groups
available for the CLPR of the specified
volumes. Please register the consistency
groups and then retry the operation.
The size of the specified file exceeds 8
megabytes, so the file cannot be
uploaded.
Are you sure you want to cancel the
change operation of the option
parameter that you specified?
Recommended Action
Since all the added SSIDs are
overlapped, the operation of adding
SSIDs cannot be executed. Click [OK],
and continue.
Follow the instructions in the message.
Follow the instructions in the message.
To delete the pair, even though you
cannot re-execute the R-VOL deletion,
click [OK]. If not, click [Cancel].
Try again after the script ends.
Click [OK].
Click [Refresh] to update the history file.
If this problem persists, please contact
HP Technical Support.
Click [OK], then continue the operation.
The requested operation has started.
Click [OK] to close the dialog.
Check the specified values and retry the
operation.
Select "Add RCU" command, then
register a DKC path.
Find the CUs that can be used by the
storage system specified by the
Controller ID.
Find the ports that can be used by the
storage system specified by the
Controller ID, and set them as initiator
ports.
Check the settings of the specified RCU,
M-VOL and R-VOL.
Register the consistency groups, then
retry the operation.
Check the size of the file, decrease the
size and retry the operation.
To cancel the change operation of the
option parameter, click [OK]. Otherwise,
click [Cancel].
Severity
Level
W
W
i
i
W
i
i
i
i
W
W
W
W
W
W
W
W

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: