HP XP P9500 Manual Page 173

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 53 Error codes (part code 6005) (continued)
Part
Error
Error Message
Code
Number
6005
58568
A pair cannot be created because the
specified M-VOL is being shredded by
Data Retention. Retry the operation after
the shredding is completed.
6005
58569
A pair cannot be created because the
specified R-VOL is being shredded by
Data Retention. Retry the operation after
the shredding is completed.
6005
58586
The operation failed because the host
did not allow the specified R-VOL to be
used as an R-VOL.
6005
58640
The Add Pair operation failed.
The volume pair cannot be created with
Time Stamp set, because RCU does not
support 4x4x4 cascade function.
6005
58712
The licensed capacity of Continuous
Access Synchronous or Continuous
Access Synchronous Z on the RCU is
insufficient.
6005
58714
The licensed capacity of Continuous
Access Synchronous or Continuous
Access Synchronous Z on the MCU is
insufficient.
6005
65740
The configuration changing processes
are conflicting at DKC.
6005
6801 1
The operation failed because the
specified M-VOL was used as a Thin
Provisioning volume.
6005
68012
The operation failed because the
specified R-VOL was used as a Thin
Provisioning volume.
Recommended Action
Confirm that the shredding
has completed in the Data
Retention window, then retry
the operation.
Confirm that the shredding
has completed in the Data
Retention window, then retry
the operation.
Check whether the number
of the specified R-VOL is
correct or the status of the
usage of the host to the
specified R-VOL.
Check whether the version
of DKC microcode of RCU
supports the 4x4x4 cascade
function. If the version does
not support the 4x4x4
cascade function, update the
microcode of RCU to the
version that supports the
function, or retry the Add
Pair operation with the
setting that does not transfer
Time Stamp.
Check the licensed capacity
of these program products.
See the user's guides of
Continuous Access
Synchronous or Continuous
Access Synchronous Z for
details of the licensed
capacities.
Check the licensed capacity
of these program products.
See the user's guides of
Continuous Access
Synchronous or Continuous
Access Synchronous Z for
details of the licensed
capacities.
Check if the configuration
changing process by RAID
Manager, Auto LUN, or
Quick Restore is not in the
operation, then retry the
operation.
Check whether the specified
R-VOL is a Thin Provisioning
volume.
Check whether the specified
R-VOL is a Thin Provisioning
volume.
Severity Level
W
W
W
W
W
W
W
W
W
Part code 6005 173

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: