HP XP P9500 Manual Page 311

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 87 Error codes (part code 9205) (continued)
Part
Error
Error Message
Code
Number
9205
7060
An error occurred during SVP
processing.
9205
71 1 1
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
9205
7310
This error code is not registered.
9205
8001
An error occurred while connecting to
the subsystem. Please retry a little later.
9205
8002
A communication time-out error occurred
in the subsystem. Please wait for a while,
and then retry the operation.
9205
8102
This function is not supported.
9205
8120
The specified logical volume does not
exist.
9205
8121
This logical volume is an open volume.
9205
8122
This logical volume is busy.
9205
8126
The logical volume is configured as a
command device.
9205
8136
The command was rejected, because the
licensed capacity was exceeded.
9205
8140
This logical volume cannot be selected
because the volume is used as one for
Compatible FlashCopy or Compatible
FlashCopy SE.
9205
8141
This logical volume cannot be selected
because it is used as a reserve volume
for Auto LUN.
9205
8142
You cannot select this logical volume
because it is used as a Continuous
Access Journal Z volume.
9205
56524
This function cannot be used by the
storage partition administrator.
9205
66000
The version number entered in the
spreadsheet is incorrect.
9205
66001
The function name entered in the
spreadsheet is incorrect (The function
name is not VR).
9205
66002
The process mode written in the
spreadsheet cannot be specified.
9205
66003
Two or more spreadsheet declaration
statements and function tags cannot be
entered in the spreadsheet file.
9205
66004
The name of the function tag is invalid
or not entered.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Retry a little later.
Retry a little later.
Check if the DKCMAIN and SVP
microcode versions are mismatched.
Specify a mainframe Volume.
Specify a mainframe Volume.
Retry a little later.
Check the logical volume configuration,
then retry the operation.
The currently licensed capacity is
insufficient. To increase the licensed
capacity, buy a new license key.
Confirm, and operate the volume again.
Check the volume, then retry the
operation.
Check the logical volume, then retry the
operation.
If the problem persists despite retrying,
please contact HP Technical Support.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the contents of the Volume
Retention spreadsheet.
Check the content of the Volume
Retention spreadsheet.
Severity
Level
E
E
E
W
W
W
W
W
W
W
W
W
W
W
E
W
W
W
W
W
Part code 9205
31 1

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: