HP XP P9500 Manual page 183

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 55 Error codes (part code 6010) (continued)
Part
Error
Error Message
Code
Number
6010
9126
The script is running now. Are you sure
you want to terminate the script?
6010
9127
Are you sure you want to close all active
graphs?
6010
9128
The specified volume was not found.
6010
9129
Recovered from the error that occurred
when copying started.
6010
9154
As a result of this operation, you will not
be able to re-start ERASE R-VOL
operation. To delete the pair forcibly,
please try again with 'Force' option.
6010
9155
The history file has been updated. Select
the OK button to display the history logs
from the beginning.
6010
9300
WARNING: Destination volume of
specified volume pair may contain some
inconsistency, because volume copy is
not completed yet. Full volume
initialization is required before re-using
it.
6010
9301
WARNING: Through this operation,
M-VOL status will be changed to SMPL
status forcibly, but R-VOL status will not
be changed. If you do this operation,
please change the R-VOL status to SMPL
later.
6010
9303
There are no valid volumes.
6010
9305
There are no initiator ports.
6010
9306
The Remote Copy function is not installed
in this controller. You cannot create
pairs.
6010
9307
You specified the same volumes more
than once. The duplicate occurrences
were excluded.
6010
9308
You set the same path more than once.
The duplicate paths are excluded.
6010
9309
All paths which you set have already
been registered. This operation will
terminate because there is no path which
can be added.
6010
9310
You set the same SSID more than once.
Duplicate SSIDs are excluded.
Recommended Action
To terminate the script, click [OK].
Otherwise, click [Cancel].
To close the graphs, click [OK].
Otherwise, click [Cancel].
Click [OK], then specify the correct
volume.
Click [OK] to continue processing.
Follow the instructions in the message.
Click [OK].
Follow the instructions in the message.
Follow the instructions in the message.
Confirm whether the command device
for Business Continuity Manager is
defined.
Set the port to Initiator before registering
RCU.
There is no Remote Copy license. Set the
license.
Since the same volume where multiple
paths are defined was selected, the
overlapped one was eliminated. Click
[OK] and continue.
Since there were overlapped paths in
the added paths, the overlapped paths
were eliminated. Click [OK] and
continue.
Since all the added paths overlapped,
the operation of adding paths cannot be
executed. Click [OK] and continue.
Since there were overlapped SSIDs in
the added SSIDs, the overlapped SSIDs
were eliminated. Click [OK], and
continue.
Severity
Level
W
W
W
i
i
i
i
i
W
W
W
W
W
W
W
Part code 6010 183

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents