Show Mpls Interface; Table 513: Show Mpls Interface Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show mpls interface

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show mpls interface show mpls interface
Copyright © 2010, Juniper Networks, Inc.
show mpls interface
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display information about MPLS-enabled interfaces. MPLS is enabled on an interface
when the interface is configured with both the
and
set interfaces interface-name unit 0 family mpls
view
Example: Configuring MPLS on EX Series Switches on page 3655
Configuring MPLS on Provider Edge Switches (CLI Procedure)
Configuring MPLS on Provider Switches (CLI Procedure) on page 3686
show mpls interface on page 3775
Table 513 on page 3775 describes the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 513: show mpls interface Output Fields

Field Name
Interface
State
Administrative groups
user@switch> show mpls interface
Interface State
so-1/0/0.0 Up
Chapter 137: Operational Commands for MPLS
set protocols mpls interface interface-name
commands.
Field Description
Name of the interface.
State of the interface: or
Up Dn
Administratively assigned colors of the link.
Administrative groups
Blue Yellow Red
show mpls interface command.
(down).
3775