Remote-Interface-Switch - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

remote-interface-switch

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
remote-interface-switch connection-name {
interface interface-name.unit-number;
receive-lsp label-switched-path;
transmit-lsp label-switched-path;
}
[edit protocols connections]
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Configure MPLS LSP tunnel cross-connects. This makes an association between a CCC
interface and two LSPs, one for transmitting MPLS packets from the local provider edge
switch to the remote provider edge switch and the other for receiving MPLS packets on
the local provider edge switch from the remote provider edge switch.
—Connection name.
connection-name
interface interface-name.unit-number
name, which corresponds to the logical unit number of the CCC interface.
receive-lsp label-switched-path
LSP name was specified by the
edge switch in the
protocols mpls
transmit-lsp label-switched-path
LSP name was specified by the
edge switch in the
protocols mpls
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring MPLS on EX Series Switches on page 3655
Configuring MPLS on Provider Edge Switches (CLI Procedure)
Junos OS MPLS Applications Configuration Guide at
http://www.juniper.net/techpubs/software/junos/junos95/index.html
Chapter 136: Configuration Statements for MPLS
—Interface name. Include the logical portion of the
—Name of the LSP from the connection's source. This
label-switched-path statement on the remote provider
stanza.
—Name of the LSP to the connection's destination. This
label-switched-path statement on the local provider
stanza.
3719