Show Analyzer; Table 528: Show Analyzer Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show analyzer

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 528: show analyzer Output Fields

Field Name
Analyzer name
Output interface
Output VLAN
Mirror ratio
Loss priority
Egress monitored interfaces
Ingress monitored interfaces
Ingress monitored VLANs
show analyzer show analyzer
Copyright © 2010, Juniper Networks, Inc.
show analyzer analyzer-name
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display information about analyzers configured for port mirroring.
—(Optional) Displays the status of a specific analyzer on the switch.
analyzer-name
view
show analyzer on page 3869
Table 528 on page 3869 lists the output fields for the
fields are listed in the approximate order in which they appear.
Field Description
Displays the name of the analyzer.
Specifies a local interface to which mirrored packets are sent. An analyzer can
have output to either an interface or a VLAN, not both.
Specifies a VLAN to which mirrored packets are sent. An analyzer can have output
to either an interface or a VLAN, not both.
Displays the ratio of packets to be mirrored, between 1 and 2047 where 1 sends
copies of all packets and 2047 sends copies of 1 out of every 2047 packets.
Displays the loss priority of mirrored packets. By default, loss priority is set to
with mirrored traffic dropped in preference for regular traffic when capacity is
exceeded. For analyzers with output to a VLAN, set the loss priority to
Displays interfaces for which traffic exiting the interfaces is mirrored.
Displays interfaces for which traffic entering the interfaces is mirrored.
Displays VLANs for which traffic entering the VLAN is mirrored.
user@host> show analyzer
Analyzer name
Output interface
Output VLAN
Mirror ratio
Loss priority
Egress monitored interfaces
Ingress monitored interfaces : ge-0/0/0.0
command-name
: employee-monitor
: ge-0/0/10.0
: remote-analyzer
: 1
: High
: ge-0/0/3.0
Chapter 138: Port Mirroring
command. Output
low ,
high .
3869