Complete Software Guide for Junos
sflow
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
3892
®
OS for EX Series Ethernet Switches, Release 10.4
sflow {
agent-id ip-address;
collector {
ip-address;
udp-port port-number;
}
disable;
interfaces interface-name {
disable;
polling-interval seconds;
sample-rate number;
}
polling-interval seconds;
sample-rate number;
source-ip ip-address;
}
[edit protocols]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Options
and
agent-id
source-ip
Configure sFlow technology, designed for monitoring high-speed switched or routed
networks, to continuously monitor traffic at wire speed on specified interfaces
simultaneously. sFlow data can be used to provide network traffic visibility information.
The remaining statements are explained separately.
The sFlow protocol is disabled by default.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 64
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3873
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3878
added in Junos OS Release 10.2 for EX Series switches.
Copyright © 2010, Juniper Networks, Inc.