Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3863

Table 504: show link-management peer Output Fields (continued)
Field Name Field Description
State of the control channel:
State
Sequence number of the hello message being sent to the peer. The range of values is
TxSeqNum
4,294,967,295
Sequence number of the last hello message received from the peer. The range of values is
RcvSeqNum
4,294,967,295.
Code that provides information about the control channel. Currently supports only code value
Flags
which indicates that the control channel is restarting after a failure in the control plane, as when the
Link Management Protocol (LMP) process starts or restarts.
Traffic-engineered links that are managed by their peer.
TE links
show show
link-management peer link-management peer
Copyright © 2010, Juniper Networks, Inc.
Up
.
user@host> show link-management peer
Peer name: sonet, System identifier: 41448
State: Up, Control address: 70.70.70.70
Hello interval: 10000, Hello dead interval: 30000
CC local ID CC remote ID State
3265
TE links:
to-sonet
Chapter 137: Operational Commands for MPLS
or .
Down
TxSeqNum
0 ConfSnd
through
1
0
RcvSeqNum Flags
1 0 R
through
,
R
3759