Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3791

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[edit]
user@switch# set interfaces lo0 unit 0 family inet address 127.1.1.1/32
user@switch# set interfaces ge-0/0/5 unit 0 family inet address 10.1.5.1/24
user@switch# set interfaces ge-0/0/6 unit 0 family inet address 10.1.6.1/24
user@switch# set interfaces ae0 unit 0 family inet address 10.1.9.2/24
Configure family mpls on the logical units of the core interfaces:
6.
[edit]
user@switch# set interfaces ge-0/0/5 unit 0 family mpls
user@switch# set interfaces ge-0/0/6 unit 0 family mpls
user@switch# set interfaces ae0 unit 0 family mpls
NOTE: You can enable
aggregated Ethernet interfaces. You cannot enable it on tagged VLAN
interfaces.
Example: Configuring MPLS on EX Series Switches on page 3655
Configuring MPLS on Provider Edge Switches Using Circuit Cross-Connect (CLI
Procedure) on page 3695
Configuring MPLS on Provider Edge Switches Using IP Over MPLS (CLI Procedure) on
page 3691
Configuring an OSPF Network (J-Web Procedure) on page 1913
Understanding Junos OS MPLS Components for EX Series Switches on page 3643
Chapter 134: Configuring MPLS
family mpls on either individual interfaces or
3687