Show Firewall; Table 431: Show Firewall Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Table 431: show firewall Output Fields

Field Name Field Description
Name of a filter that has been configured with the
Filter
When an interface-specific filter is displayed, the name of the filter is followed by the full interface
name and by either
When dynamic filters are displayed, the name of the filter is followed by the full interface name and
by either
displayed, the name of the filter is prefixed with two underscore (__) characters and the name of the
logical system (for example,
Display filter counter information:
Counters
Display policer information:
Policers
Copyright © 2010, Juniper Networks, Inc.
for an input filter or
-i
for an input filter or
-in
__ls1/filter1
—Name of a filter counter that has been configured with the
Name
Bytes —Number of bytes that match the filter term under which the
—Number of packets that matched the filter term under which the
Packets
—Name of policer.
Name
Packets —Number of packets that matched the filter term under which the policer action is specified.
This is only the number of out-of-specification (out-of-spec) packet counts, not all packets policed
by the policer.
Chapter 112: Operational Commands for Firewall Filters
statement at the
filter
for an output filter.
-o
for an output filter. When a logical system–specific filter is
-out
).
hierarchy level.
[edit firewall]
firewall filter action.
counter
counter action is specified.
action is specified.
counter
3351