Moving-Average-Size; One-Way-Hardware-Timestamp - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

moving-average-size

Syntax
Hierarchy Level
Release Information
Description
Options
Usage Guidelines
Required Privilege
Level

one-way-hardware-timestamp

Syntax
Hierarchy Level
Release Information
Description
Usage Guidelines
Required Privilege
Level
Related
Documentation
4016
®
OS for EX Series Ethernet Switches, Release 10.4
moving-average-size number;
[edit services rpm bgp],
[edit services rpm probe owner test test-name]
Statement introduced in Junos OS Release 8.5.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Enable statistical calculation operations to be performed across a configurable number
of the most recent samples.
—Number of samples to be used in calculations.
number
Range: 0 through 255
See Configuring RPM Probes.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
one-way-hardware-timestamp;
[edit services rpm probe owner test test-name]
Statement introduced in Junos OS Release 8.5.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Enable timestamping of RPM probe messages for one-way delay and jitter measurements.
You must configure this statement along with the
invoke timestamping. This feature is supported only with
, and
udp-ping udp-ping-timestamp
See Configuring RPM Timestamping.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
destination-interface, hardware-timestamp on page 4015
destination-interface
icmp-ping
probe types.
Copyright © 2010, Juniper Networks, Inc.
statement to
, icmp-ping-timestamp ,