Source-Address - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

rpm
Syntax
Hierarchy Level
Release Information
Description
Options
Usage Guidelines
Required Privilege
Level

source-address

Syntax
Hierarchy Level
Release Information
Description
Options
Usage Guidelines
Required Privilege
Level
Copyright © 2010, Juniper Networks, Inc.
rpm (client | server);
[edit interfaces interface-name unit logical-unit-number]
Statement introduced in Junos OS Release 8.1.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Associate an RPM client (router or switch that originates RPM probes) or RPM server
with a specified interface.
client —Identifier for RPM client router or switch.
—Identifier for RPM server.
server
See Configuring RPM Timestamping.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
source-address address;
[edit services rpm probe owner test test-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Specify the source IP address used for probes. If the source IP address is not one of the
router's or switch's assigned addresses, the packet will use the outgoing interface's
address as its source.
—Valid IP address.
address
See Configuring RPM Probes.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Chapter 141: Real-Time Performance Monitoring (RPM)
4023