Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3884

Complete Software Guide for Junos
Table 514: show mpls lsp Output Fields (continued)
Field Name Field Description
(Ingress LSP) Current value of the actual maximum average bandwidth
MaxAvgBW util
utilization, in bps.
Overflow limit (Ingress LSP) Configured value of the threshold overflow limit.
Overflow sample (Ingress LSP) Current value for the overflow sample count.
count
Bandwidth (Ingress LSP) Current value of the bandwidth adjustment timer, indicating the
amount of time remaining until the bandwidth adjustment will take place, in
Adjustment in nnn
seconds.
second(s)
(Ingress LSP) A value of
Active path
indicates that the path is not active. In the following example, "long" is the active
indicator
path.
*Primary long
Standby short
(Ingress LSP) Name of the primary path.
Primary
(Ingress LSP) Name of the secondary path.
Secondary
(Ingress LSP) Name of the path in standby mode.
Standby
(Ingress LSP) State of the path:
State
(Ingress LSP) Class-of-service value.
COS
Bandwidth per (Ingress LSP) Active bandwidth for the LSP path for each MPLS class type, in
bps.
class
(Ingress LSP) Configured value of the setup priority and the reservation priority,
Priorities
where 0 is the highest priority and 7 is the lowest priority.
(Ingress LSP) Configured value of the optimize timer, indicating the total amount
OptimizeTimer
of time allowed before path reoptimization, in seconds.
(Ingress LSP) Configured value of the smart optimize timer, indicating the total
SmartOptimizeTimer
amount of time allowed before path reoptimization, in seconds.
Reoptimization in (Ingress LSP) Current value of the optimize timer, indicating the amount of time
remaining until the path will be reoptimized, in seconds.
xxx seconds
Computed ERO (S (Ingress LSP) Computed explicit route. A series of hops, each with an address
[L] denotes strict followed by a hop indicator. The value of the hop indicator can be strict (
loose (
[loose] hops)
(Ingress LSP) Constrained Shortest Path First metric for this path.
CSPF metric
3780
®
OS for EX Series Ethernet Switches, Release 10.4
indicates that the path is active. The absence of
*
or
Up
L ).
(down).
Dn
Level of Output
detail extensive
detail extensive
detail extensive
detail extensive
* detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
extensive
detail extensive
detail extensive
detail extensive
detail extensive
S ) or
detail extensive
Copyright © 2010, Juniper Networks, Inc.