Logical-System - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

logical-system

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3926
®
OS for EX Series Ethernet Switches, Release 10.4
logical-system logical-system-name {
routing-instance routing-instance-name;
}
[edit snmp community community-name],
[edit snmp trap-group],
[edit snmp trap-options]
[edit snmp v3target-address target-address-name]
Statement introduced in Junos OS Release 9.3
Statement introduced in Junos OS Release 9.0 for EX Series switches.
NOTE: The logical-system
and is backward-compatible with Junos OS Release 8.3 and later.
Specify a logical system name for SNMP v1 and v2c clients.
Include at the
[edit snmp trap-options]
as the source address of an SNMP trap.
Include at the [edit snmp v3 target-address]
name as the destination address for an SNMPv3 trap or inform.
logical-system-name –Name of the logical system.
routing-instance routing-instance-name
with the logical system.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Specifying a Routing Instance in an SNMPv1 or SNMPv2c Community
Configuring the Trap Target Address
statement replaces the logical-router
hierarchy level to specify a logical-system address
hierarchy level to specify a logical-system
–Statement to specify a routing instance associated
Copyright © 2010, Juniper Networks, Inc.
statement,