Configuration Statements For Sflow Technology; Edit Protocols] Configuration Statement Hierarchy - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Related
Documentation

Configuration Statements for sFlow Technology

[edit protocols] Configuration Statement Hierarchy

3880
®
OS for EX Series Ethernet Switches, Release 10.4
[edit protocols sflow interfaces]
user@switch# set sample-rate ingress number
NOTE: The interface-level configuration overrides the global configuration.
To specify an IP address to be used as the agent ID for the sFlow agent:
7.
[edit protocols sflow]
user@switch# set agent-id ip-address
To specify the source IP address to be used for sFlow datagrams:
8.
[edit protocols sflow]
user@switch# set source-ip ip-address
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3873
Understanding How to Use sFlow Technology for Network Monitoring on an EX Series
Switch on page 3871
[edit protocols] Configuration Statement Hierarchy on page 3880
protocols {
connections {
remote-interface-switch connection-name {
interface interface-name.unit-number;
transmit-lsp label-switched-path;
receive-lsp label-switched-path;
}
}
dot1x {
authenticator {
authentication-profile-name profile-name;
interface (all | [ interface-names ]) {
disable;
guest-vlan ( vlan-id | vlan-name);
mac-radius <restrict>;
maximum-requests number;
no-reauthentication;
quiet-period seconds;
reauthentication {
interval seconds;
}
retries number;
server-fail (deny | permit | use-cache | vlan-id | vlan-name);
server-reject-vlan (vlan-id | vlan-name);
server-timeout seconds;
supplicant (multiple | single | single-secure);
Copyright © 2010, Juniper Networks, Inc.