Table 453: Classifiers Configuration Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Defining CoS Classifiers (J-Web Procedure)

Table 453: Classifiers Configuration Fields

Field
Classifier Name
Classifier Type
3434
®
OS for EX Series Ethernet Switches, Release 10.4
Example: Configuring CoS on EX Series Switches on page 3401
Assigning CoS Components to Interfaces (CLI Procedure) on page 3447
Monitoring CoS Classifiers on page 3455
Understanding CoS Classifiers on page 3381
You can use the J-Web interface to define CoS classifiers on an EX Series switch.
Classifiers examine the CoS value or alias of an incoming packet and assign the packet
a level of service by setting its forwarding class and loss priority.
To define CoS classifiers:
Select >
1. Configure Class of Service
NOTE: After you make changes to the configuration in this page, you must
commit the changes immediately for them to take effect. To commit all
changes to the active configuration, select Commit Options > Commit.
See Using the Commit Options to Commit Configuration Changes for
details about all commit options.
Click one:
2.
—Adds a classifier. Enter information into the classifier page as described in
Add
Table 453 on page 3434.
Edit —Modifies an existing classifier. Enter information into the classifier page as
described in Table 453 on page 3434.
—Deletes an existing classifier.
Delete
Function
Specifies the name for a classifier.
Specifies the type of classifier:
or .
inet-precedence
> .
Classifiers
Your Action
To name a classifier, type the name—for
example,
ba-classifier
dscp , ieee-802.1 , Select a value from the list.
.
Copyright © 2010, Juniper Networks, Inc.