Action-Profile (Applying To Oam Cfm, For Ex Series Switch Only) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

action-profile (Applying to OAM CFM, for EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Understanding Server Fail Fallback and Authentication on EX Series Switches on
page 2756
IGMP Snooping on EX Series Switches Overview on page 2535
Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches on page 2759
Understanding MSTP for EX Series Switches on page 1755
Understanding Multiple VLAN Registration Protocol (MVRP) on EX Series Switches
on page 1517
Understanding Ethernet OAM Connectivity Fault Management for an EX Series Switch
on page 4077
Understanding Ethernet OAM Link Fault Management for an EX Series Switch on
page 4039
Understanding RSTP for EX Series Switches on page 1753
Understanding STP for EX Series Switches on page 1751
Understanding How to Use sFlow Technology for Network Monitoring on an EX Series
Switch on page 3871
Understanding VSTP for EX Series Switches on page 1760
action-profile profile-name {
default-actions {
interface-down;
}
}
[edit protocols oam ethernet connectivity-fault-management]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure a name and default action for an action profile.
—Name of the action profile.
profile-name
default-actions —Defines the action to be taken when connectivity to the remote MEP is
lost.
—Brings the interface down when a remote MEP connectivity failure is
interface-down
detected.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 4082
Junos OS Network Interfaces Configuration Guide
Chapter 143: Ethernet OAM Connectivity Fault Management
4093