Table 459: Assigning Cos Components To Logical Interfaces - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

Table 459: Assigning CoS Components to Logical Interfaces

Field Function
Unit Specifies the name of a logical interface. Allows you to
assign CoS components while configuring a logical
interface on a physical interface at the same time.
Forwarding Assigns a predefined forwarding class to incoming packets
Class on a logical interface.
Classifiers Allows you to apply classification maps to a logical
interface. Classifiers assign a forwarding class and loss
priority to an incoming packet based on its CoS value.
3448
®
OS for EX Series Ethernet Switches, Release 10.4
Select >
1. Configure Class of Service
NOTE: After you make changes to the configuration in this page, you must
commit the changes immediately for them to take effect. To commit all
changes to the active configuration, select Commit Options > Commit.
See Using the Commit Options to Commit Configuration Changes for
details about all commit options.
To configure interface association, select an interface from the list and click
2.
Select one:
3.
Associate system default scheduler map
scheduler map.
Select the scheduler map
map. Select the scheduler map from the list.
NOTE: On the 40-port SFP+ line card for EX8200 switches, the J-Web
interface does not allow you to commit your changes unless you assign
the same scheduler map or the default scheduler map to all interfaces in
a port group.
Click .
4. OK
To manage a CoS service assignment on a logical interface, click one:
5.
Add —Adds a CoS service to a logical interface on a specified physical interface.
Enter information as described in Table 459 on page 3448.
—Modifies a CoS service assignment to a logical interface. Enter information
Edit
as described in Table 459 on page 3448.
Delete —Deletes the CoS service assignment to a logical interface.
>
Assign to Interface
—Associates the interface with the default
—Associates the interface with a configured scheduler
Your Action
Type the interface name.
To assign CoS services to all logical interfaces
configured on this physical interface, type the
wildcard character (*).
To assign a forwarding class to an interface,
select the forwarding class.
To assign a classification map to an interface,
select an appropriate classifier for each CoS value
type used on the interface.
Copyright © 2010, Juniper Networks, Inc.
.
Edit .