Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 4078

Complete Software Guide for Junos
Table 533: show snmp health-monitor Output Fields (continued)
Field Name Field Description
State of the alarm or event entry:
State
Alarms:
active
falling threshold crossed
threshold limit.
rising threshold crossed
threshold limit.
under creation
startup
object not available
health monitor agent.
instance not available
the health monitor agent.
object type invalid
object processing errored
was processed.
unknown
Variable OID Object ID to which the variable name is resolved. The format is
Sample type Method of sampling the monitored variable and calculating the value to compare
against the upper and lower thresholds. It can have the value of
or delta value
Startup alarm Alarm that might be sent when this entry is first activated, depending on the
following criteria:
Alarm is sent when one of the following situations exists:
Value of the alarm is above or equal to the rising threshold and the startup
type is either
Value of the alarm is below or equal to the falling threshold and the startup
type is either
Alarm is not sent when one of the following situations exists:
Value of the alarm is above or equal to the rising threshold and the startup
type is
Value of the alarm is below or equal to the falling threshold and the startup
type is
Value of the alarm is between the thresholds.
Name of the entry configured by the user. If the entry was created through the
Owner
CLI, the owner has
Mechanism by which the entry was configured (
Creator
Time period between samples (in seconds).
Sample interval
Upper limit threshold value as a percentage of the maximum possible value.
Rising threshold
3974
®
OS for EX Series Ethernet Switches, Release 10.4
—Entry is fully configured and activated.
—Value of the variable has crossed the lower
—Value of the variable has crossed the upper
—Entry is being configured and is not yet activated.
—Alarm is waiting for the first sample of the monitored variable.
—Monitored variable of that type is not available to the
—Monitored variable's instance is not available to
—Monitored variable is not a numeric value.
—An error occurred when the monitored variable
—State is not one of the above.
.
or
rising alarm rising or falling alarm.
or
falling alarm rising or falling alarm
falling alarm .
.
rising alarm
prepended to it.
monitor
x.x.x.x .
absolute value
.
).
Health Monitor
Copyright © 2010, Juniper Networks, Inc.
Level of Output
All levels
detail
detail
detail
detail
detail
detail
detail