Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3413

Table 428: Terms Configuration Parameters (continued)
Field Function
Local Preference Specifies the BGP local preference attribute.
Class of Service Specifies and applies the class-of-service parameters to routes
installed into the routing table.
Source class
The value entered here maintains the packet counts for a
route passing through your network, based on the source
address.
Destination class
The value entered here maintains packet counts for a route
passing through your network, based on the destination
address in the packet.
Forwarding class
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Configuring BGP Sessions (J-Web Procedure) on page 1909
Configuring an OSPF Network (J-Web Procedure) on page 1913
Configuring a RIP Network (J-Web Procedure) on page 1917
Configuring Static Routing (J-Web Procedure) on page 1922
Layer 3 Protocols Supported on EX Series Switches on page 17
Chapter 108: Configuring Firewall Filters
Your Action
Select the action and type a value.
Type the source class.
Type the destination class.
Type the forwarding class.
3309