Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3916

Complete Software Guide for Junos
Table 520: show rsvp session Output Fields (continued)
Field Name Field Description
(When LSP is bidirectional) Label the upstream node suggests for use in the
Recovery label
Resv message that is sent.
received
(When LSP is bidirectional) Label the downstream node suggests for use in its
Recovery label sent
Resv messages that is returned.
Suggested label (When LSP is bidirectional) Label the upstream node suggests for use in the
Resv message that is sent.
received
(When LSP is bidirectional) Label the downstream node suggests for use in its
Suggested label
Resv message that is returned.
sent
or RSVP reservation style. This field consists of two parts. The first is the number
Resv style Style
of active reservations. The second is the reservation style, which can be
filter),
Incoming label for this LSP.
Label in
Outgoing label for this LSP.
Label out
Time left Number of seconds remaining in the lifetime of the reservation.
Since Date and time when the RSVP session was initiated.
Tspec Sender's traffic specification, which describes the sender's traffic parameters.
DiffServ info Indicates whether the LSP is a multiclass LSP (
a Differentiated-Services-aware traffic engineering LSP (
bandwidth Bandwidth for each class type (
Port number Protocol ID and sender/receiver port used in this RSVP session.
FastReroute Fast reroute has been requested by the ingress routing device.
desired
Soft preemption Soft preemption has been requested by the ingress routing device.
desired
(Data [not a bypass or backup] LSP when the protection scheme has been
FastReroute
requested) Fast reroute (one-to-one backup) has been requested by the
desired
ingress routing device.
(Data [not a bypass or backup] LSP when the protection scheme has been
Link protection
requested) Link protection (many-to-one backup) has been requested by the
desired
ingress routing device.
3812
®
OS for EX Series Ethernet Switches, Release 10.4
(shared explicit), or (wildcard filter).
SE WF
ct0 ,
multiclass diffServ-TE LSP
diffServ-TE LSP
ct1 , ct2 , or ct3 ).
Level of Output
detail
detail
detail
detail
brief detail
FF (fixed
brief detail
brief detail
brief detail
detail
detail
) or detail
).
detail
detail
detail
detail
detail extensive
detail extensive
Copyright © 2010, Juniper Networks, Inc.