Show Rsvp Session; Table 519: Show Rsvp Session Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

For ex series ethernet switches
Table of Contents

Advertisement

Related
Documentation
List of Sample Output
Output Fields

Table 519: show rsvp session Output Fields

Field Name
Field Description
Information about ingress RSVP sessions.
Ingress RSVP
Information about ingress RSVP sessions. Each session has one line of output.
Ingress RSVP
Information about egress RSVP sessions.
Egress RSVP
Transit RSVP
Information about the transit RSVP sessions.
To
Destination (egress switch) of the session.
From
Source (ingress switch) of the session.
State
State of the path:
being taken down gracefully.
Address
Destination (egress switch) of the LSP.
State of the LSP that is being handled by this RSVP session. It can be either
LSPstate
Dn
(down), or
gracefully.
Number of active routes (prefixes) that have been installed in the routing table.
Rt
For ingress RSVP sessions, the routing table is the primary IPv4 table (
For transit and egress RSVP sessions, the routing table is the primary MPLS table
mpls.0
Number of active routes (prefixes) that have been installed in the forwarding
ActiveRoute
table. For ingress RSVP sessions, the forwarding table is the primary IPv4 table
(
inet.0
MPLS table (
Name of the LSP.
LSPname
Copyright © 2010, Juniper Networks, Inc.
Example: Configuring MPLS on EX Series Switches on page 3655
Configuring MPLS on Provider Edge Switches (CLI Procedure)
Configuring MPLS on Provider Switches (CLI Procedure) on page 3686
Junos OS MPLS Applications Configuration Guide
show rsvp session on page 3806
show rsvp session statistics on page 3807
show rsvp session detail on page 3807
show rsvp session extensive on page 3807
Table 519 on page 3805 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Up
,
Down
, or
AdminDn
AdminDn
.
AdminDn
indicates that the LSP is being taken down
).
). For transit and egress RSVP sessions, the forwarding table is the primary
).
mpls.0
Chapter 137: Operational Commands for MPLS
.
AdminDn
indicates that the LSP is
command.

show rsvp session

Level of Output
detail
All levels
All levels
All levels
All levels
All levels
All levels
detail
,
Up
brief, detail
brief
).
inet.0
detail
brief, detail
3805

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents