Loss-Priority - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

loss-priority

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
3866
®
OS for EX Series Ethernet Switches, Release 10.4
loss-priority priority;
[edit ethernet-switching-options analyzer name]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure a loss priority for mirrored packets. By default, the switch applies a lower priority
to mirrored data than to regular port-to-port data—mirrored traffic is dropped in
preference for regular traffic when capacity is exceeded. For port mirroring configurations
with output to an analyzer VLAN, set the loss priority to high.
Low
priority—The value for priority can be low or high.
Default: low
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Understanding Port Mirroring on EX Series Switches on page 3833
Example: Configuring Port Mirroring for Remote Monitoring of Employee Resource Use
on EX Series Switches on page 3842
Copyright © 2010, Juniper Networks, Inc.