Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3801

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
If you are configuring a CCC on a tagged VLAN interface, enable VLAN tagging on the
8.
customer-edge interface
[edit interfaces ge-0/0/2]
user@switch# set vlan-tagging
If you are configuring a CCC on a simple interface (
If you are configuring a CCC on a tagged VLAN interface, configure the logical unit of
9.
the customer-edge interface with a VLAN ID:
[edit interfaces ge-0/0/2 unit 1]
user@switch# set vlan-id 100
If you are configuring a CCC on a simple interface (
Configure the logical unit of the customer-edge interface to belong to
10.
[edit interfaces ge-0/0/1 unit 0]
user@switch# set family ccc
[edit interfaces ge-0/0/2 unit 1]
user@switch# set family ccc
Associate the CCC interface with two LSPs, one for transmitting MPLS packets and
11.
the other for receiving MPLS packets:
[edit protocols]
user@switch# set connections remote-interface-switch ge-1–to-pe2 interface ge-0/0/1.0
user@switch# set connections remote-interface-switch ge-1–to-pe2 transmit-lsp
lsp_to_pe2_ge1
user@switch# set connections remote-interface-switch ge-1–to-pe2 receive-lsp
lsp_to_pe1_ge1
[edit protocols]
user@switch# set connections remote-interface-switch ge-1–to-pe2 interface ge-0/0/2.1
user@switch# set connections remote-interface-switch ge-1–to-pe2 transmit-lsp
lsp_to_pe2_ge1
user@switch# set connections remote-interface-switch ge-1–to-pe2 receive-lsp
lsp_to_pe1_ge1
TIP: The
transmit-lsp
on PE-1 (the local PE switch) by the
the
protocols mpls
The
receive-lsp
PE-2 (the remote PE switch) by the
the
protocols mpls
When you have completed configuring one PE switch, follow the same procedures to
configure the other PE switch.
Example: Configuring MPLS on EX Series Switches on page 3655
Configuring MPLS on Provider Switches (CLI Procedure) on page 3686
of the local PE switch:
ge-0/0/2
ge-0/0/1
ge-0/0/1
option specifies the LSP name that was configured
label-switched-path
stanza.
option specifies the LSP name that was configured on
label-switched-path
stanza.
Chapter 134: Configuring MPLS
), omit this step.
), omit this step.
:
family ccc
statement within
statement within
3697