Verifying Real-Time Performance Monitoring; Viewing Real-Time Performance Monitoring Information - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Related
Documentation

Verifying Real-Time Performance Monitoring

Viewing Real-Time Performance Monitoring Information

Related
Documentation
4010
®
OS for EX Series Ethernet Switches, Release 10.4
user@switch# set data-size size
Enable hardware timestamping of RPM probe messages:
11.
[edit services rpm probe owner test test-name]
user@switch# set hardware-timestamp
Configuring Real-Time Performance Monitoring (J-Web Procedure) on page 4001
Understanding Real-Time Performance Monitoring on EX Series Switches on page 3998
Viewing Real-Time Performance Monitoring Information on page 4010
Real-time performance monitoring (RPM) on EX Series switches enables you to configure
and send probes to a specified target and monitor the analyzed results to determine
packet loss, round-trip time, and jitter. The J-Web interface provides a graphical view of
RPM information for EX Series switches.
To view the RPM information using the J-Web interface:
Select >
1. Troubleshoot RPM
Select the
Round Trip Time
2.
included. Clear the check-box to view the graph without the round-trip time.
From the
3. Refresh Time
Configuring Real-Time Performance Monitoring (J-Web Procedure) on page 4001
> .
View RPM
check box to display the graph with round-trip time
list, select a refresh time interval for the graph.
Copyright © 2010, Juniper Networks, Inc.