Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3582

For ex series ethernet switches
Table of Contents

Advertisement

Complete Software Guide for Junos
exp
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3478
®
OS for EX Series Ethernet Switches, Release 10.4
exp classifier-name {
import (classifier-name | default);
forwarding-class class-name {
loss-priority level {
code-points [ aliases ] [ 3–bit-patterns ];
}
}
}
[edit class-of-service classifiers]
Statement introduced in Junos OS Release 10.1 for EX Series switches.
Define the experimental bits (EXP) code point mapping that is applied to the MPLS
packets.
EX Series switches support only one EXP code mapping on the switch (either default or
custom). It is applied globally and implicitly to all the MPLS-enabled interfaces on the
switch. You cannot bind it to an individual interface and you cannot disable it.
—Name of the classifier.
classifier-name
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Understanding Using CoS with MPLS Networks on EX Series Switches on page 3394
Configuring MPLS on Provider Edge Switches Using Circuit Cross-Connect (CLI
Procedure) on page 3695
Configuring MPLS on Provider Edge Switches Using IP Over MPLS (CLI Procedure) on
page 3691
Configuring CoS on Provider Switches of an MPLS Network (CLI Procedure) on page 3690
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents