If-Exceeding - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

if-exceeding

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
3336
®
OS for EX Series Ethernet Switches, Release 10.4
if-exceeding {
bandwidth-limit bps;
bandwidth-percentpercent
burst-size-limit bytes;
}
[edit firewall policer policer-name]
[edit logical-systems logical-system-name firewall policer policer-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Logical systems support introduced in Junos OS Release 9.3.
Configure policer rate limits.
The statement is supported on routers only.
bandwidth-percent
The remaining statements are explained separately.
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Example: Configuring Firewall Filters for Port, VLAN, and Router Traffic on EX Series
Switches on page 3261
Configuring Policers to Control Traffic Rates (CLI Procedure) on page 3300
Understanding the Use of Policers in Firewall Filters on page 3259
Rate Limiting
Single-Rate Two-Color Policer Overview
Configuring a Single-Rate Two-Color Policer
Copyright © 2010, Juniper Networks, Inc.