Show Link-Management; Table 503: Show Link-Management Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show link-management

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 503: show link-management Output Fields

Field Name
Peer Name
System identifier
State
Control address
CC local ID
CC remote ID
State
TxSeqNum
RcvSeqNum
3754
®
OS for EX Series Ethernet Switches, Release 10.4
show link-management
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display Multiprotocol Label Switching (MPLS) peer and traffic engineering link information.
This command has no options.
view
show link-management peer on page 3758
show link-management routing on page 3760
show link-management statistics on page 3763
show link-management te-link on page 3765
show link-management on page 3757
Table 503 on page 3754 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Field Description
Name of the peer.
Internal identifier for the peer. The range of values is
State of the peer: or
Up
Address to which a control channel is established.
Identifier assigned to the control channel by the local peer. The range of values is
.
4,294,967,296
Identifier assigned to the control channel by the remote peer. The range of values is
4,294,967,296 .
State of the control channel:
Sequence number of the hello message being sent to the peer. The range of values is
4,294,967,295 .
Sequence number of the last hello message received from the peer. The range of values is
through
0 4,294,967,295.
0
.
Down
or .
Up Down
show link-management command.
through .
64,000
through
1
1
1
Copyright © 2010, Juniper Networks, Inc.
through
through