Standby; Traffic-Engineering - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

standby

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

traffic-engineering

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
3722
®
OS for EX Series Ethernet Switches, Release 10.4
standby;
[edit protocols mpls label-switched-path lsp-name secondary path-name]
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Enable the path to remain up at all times to provide instant switchover if connectivity
problems occur.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Path Protection in an MPLS Network (CLI Procedure) on page 3681
traffic-engineering;
[edit protocols ospf | isis]
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Enable the traffic engineering features of the specified routing protocol.
Traffic engineering is disabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring MPLS on EX Series Switches on page 3655
Configuring MPLS on Provider Edge Switches (CLI Procedure)
Configuring MPLS on Provider Switches (CLI Procedure) on page 3686
Configuring an OSPF Network (J-Web Procedure) on page 1913
Junos OS MPLS Applications Configuration Guide at
http://www.juniper.net/techpubs/software/junos/junos101/index.html
Copyright © 2010, Juniper Networks, Inc.