Configuring Ethernet Oam Connectivity Fault Management - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Results
CLI Quick
Configuration
Step-by-Step
Procedure
4080
®
OS for EX Series Ethernet Switches, Release 10.4
[edit protocols oam ethernet connectivity-fault-management
maintenance-domain private maintenance-association private-ma]user@switch1#
set continuity-check hold-interval 1s
Configure the maintenance association end point (MEP):
5.
[edit protocols oam ethernet connectivity-fault-management
maintenance-domain private maintenance-association private-ma]
user@switch1# set mep 100 interface ge-1/0/1 auto-discovery direction down
Check the results of the configuration.
[edit]
user@switch1# show
protocols {
oam {
ethernet {
connectivity-fault-management {
maintenance-domain private {
level 0;
maintenance-association private-ma {
continuity-check {
interval 1s;
}
mep 100 {
interface ge-1/0/1;
auto-discovery;
direction down;
}
}
}
}
}
Configuring Ethernet OAM Connectivity Fault Management on Switch 2
To quickly configure Ethernet OAM CFM, copy the following commands and paste them
into the switch terminal window:
[edit protocols oam ethernet connectivity-fault-management maintenance-domain]set
name-format character-string set maintenance-domain private level 0set
maintenance-association private-maset continuity-check hold-interval 1s
The configuration on switch 2 mirrors that on switch 2.
Specify the maintenance domain name format:
1.
[edit protocols oam ethernet connectivity-fault-management]user@switch2#
set name-format character-string
Specify the maintenance domain name and the maintenance domain level:
2.
[edit protocols oam ethernet connectivity-fault-management]user@switch2#
set maintenance-domain private level 0
Create a maintenance association:
3.
[edit protocols oam ethernet connectivity-fault-management
maintenance-domain private]user@switch2# set maintenance-association private-ma
Copyright © 2010, Juniper Networks, Inc.