Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3904

For ex series ethernet switches
Table of Contents

Advertisement

Complete Software Guide for Junos
Table 518: show rsvp neighbor Output Fields (continued)
Field Name
Field Description
Number of neighbor up or down transitions detected by RSVP hello packets. If
Up cnt and Down
the up count is 1 greater than the down count, the neighbor is currently up.
cnt
Otherwise, the neighbor is down. Neighbors that do not support RSVP hello
packets, such as routers running Junos OS Release 3.2 or earlier, are not reported
as up or down.
State of the RSVP neighbor:
status
—Routing device can detect RSVP Hello messages from the neighbor.
Up
Down
Communication failure from the neighbor.
Communication from IGP that the neighbor is unavailable.
Change in the sequence numbers in the RSVP Hello messages sent by the
neighbor.
Restarting
neighbor remains in this state until it has restarted or is declared dead. This
state is possible only when graceful restart is enabled.
Restarted
(graceful restart) procedures.
Dead
Any RSVP sessions with that neighbor are torn down.
Time elapsed since the neighbor state changed either from up to down or from
LastChange
down to up. The format is
Last changed time
Time elapsed since the neighbor state changed either from up to down or from
down to up.
Frequency at which RSVP hellos are sent on this interface (in seconds).
HelloInt
Number of hello packets sent to and received from the neighbor.
HelloTx/Rx
Number of RSVP hello packets that have been sent to and received from the
Hello
neighbor.
Message received
Number of Path and Resv messages that this routing device has received from
the neighbor.
Identification provided by the remote routing device during Hello message
Remote Instance
exchange.
Identification sent to the remote routing device during Hello message exchange.
Local Instance
3800
®
OS for EX Series Ethernet Switches, Release 10.4
—Routing device has received one of the following indications:
—RSVP neighbor is unavailable and might be restarting. The
—RSVP neighbor has restarted and is undergoing state recovery
—Routing device has lost all communication with the RSVP neighbor.
hh:mm:ss
.
Level of Output
detail
detail
All levels
detail
All levels
All levels
detail
detail
detail
detail
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents