Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3910

For ex series ethernet switches
Table of Contents

Advertisement

Complete Software Guide for Junos
Table 519: show rsvp session Output Fields (continued)
Field Name
Field Description
Indicates whether the RSVP session is for the primary or secondary LSP path.
LSPpath
LSPpath
egress, and transit switches.
deletion has been triggered.
(When LSP is bidirectional) Label the upstream node suggests for use in the
Recovery label
Resv message that is sent.
received
(When LSP is bidirectional) Label the downstream node suggests for use in its
Recovery label sent
Resv messages that is returned.
Suggested label
(When LSP is bidirectional) Label the upstream node suggests for use in the
Resv message that is sent.
received
Suggested label
(When LSP is bidirectional) Label the downstream node suggests for use in its
sent
Resv message that is returned.
Resv style
or
Style
RSVP reservation style. This field consists of two parts. The first is the number
of active reservations. The second is the reservation style, which can be
filter),
Label in
Incoming label for this LSP.
Label out
Outgoing label for this LSP.
Time left
Number of seconds remaining in the lifetime of the reservation.
Since
Date and time when the RSVP session was initiated.
Tspec
Sender's traffic specification, which describes the sender's traffic parameters.
Protocol ID and sender/receiver port used in this RSVP session.
Port number
A
Creating backup
link down
LSP, link down
Deleting backup
Link has come back up and the LSP has been restored. Because the backup
LSP is no longer needed, it is deleted.
LSP, protected LSP
restored
PATH rcvfrom
Address of the previous-hop (upstream) switch or client, interface the neighbor
used to reach this switch, and number of packets received from the
upstream neighbor.
show rsvp session
show rsvp session
3806
®
OS for EX Series Ethernet Switches, Release 10.4
can be either
or
primary
secondary
LSPpath
SE
(shared explicit), or
WF
(wildcard filter).
event occurred, and traffic is being switched over to the bypass LSP.
user@switch> show rsvp session
Ingress RSVP: 1 sessions
To
From
10.255.245.214
10.255.245.212
Total 1 displayed, Up 1, Down 0
and can be displayed on the ingress,
can also indicate when a graceful LSP
State
Rt Style Labelin Labelout LSPname
AdminDn
0
1 FF
Level of Output
detail
detail
detail
detail
detail
brief detail
FF
(fixed
brief, detail
brief, detail
brief, detail
detail
detail
detail
extensive
extensive
detail
-
22293 LSP Bidir
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents