Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3539

Table 453: Classifiers Configuration Fields (continued)
Field
Code Point Mapping
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Function
Sets the forwarding classes and the packet loss
priorities (PLPs) for specific CoS values and
aliases.
Defining CoS Classifiers (CLI Procedure) on page 3432
Example: Configuring CoS on EX Series Switches on page 3401
Monitoring CoS Classifiers on page 3455
Understanding CoS Classifiers on page 3381
Chapter 115: Configuring CoS
Your Action
To add a code point mapping:
1. Click .
Add
2. Select the code point.
3. Select a forwarding class from the following
list:
expedited-forwarding—Provides low loss,
low delay, low jitter, assured bandwidth,
and end-to-end service. Packets can be
forwarded out of sequence or dropped.
best-effort—Provides no special CoS
handling of packets. Typically, RED drop
profile is aggressive and no loss priority is
defined.
assured-forwarding—Provides high
assurance for packets within the specified
service profile. Excess packets are
dropped.
network-control—Packets can be delayed
but not dropped.
4. Select the loss priority.
To assign a loss priority, select one:
high—Packet has a high loss priority.
low—Packet has a low loss priority.
3435