Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 4097

show snmp v3
Syntax
Release Information
Description
Options
Additional Information
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show snmp v3
<access <brief | detail> | community | general | groups | notify <filter> | target <address |
parameters> | users>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the Simple Network Management Protocol version 3 (SNMPv3) operating
configuration.
none —Display all of the SNMPv3 operating configuration.
—(Optional) Display SNMPv3 access information.
access
—(Optional) Display brief or detailed information about SNMPv3 access
brief | detail
information.
—(Optional) Display SNMPv3 community information.
community
general —(Optional) Display SNMPv3 general information.
—(Optional) Display SNMPv3 security-to-group information.
groups
notify <filter> —(Optional) Display SNMPv3 notify and, optionally, notify filter information.
target <address | parameters>
target address or target parameter information.
users —(Optional) Display SNMPv3 user information.
To edit the default display of the
statement at the [edit snmp v3]
view
show snmp v3 on page 3994
Table 538 on page 3994 describes the output fields for the
fields are listed in the approximate order in which they appear.
—(Optional) Display SNMPv3 target and, optionally, either
command, specify options in the
show snmp v3
hierarchy level.
Chapter 140: SNMP
show
show snmp v3 command. Output
3993